Huawei S6730-H24X6C -24 x 10 Gig SFP+, 6 x 40/100 Gig QSFP28

$1,250.00
In stock
SKU
S6730-H24X6C -24 x 10 Gig SFP+, 6 x 40/100 Gig QSFP28
 

Product Code

S6730-H24X6C

Fixed ports

24 x 10 Gig SFP+, 6 x 40/100 Gig QSFP28

Dimensions (W x D x H)

442 mm x 420 mm x 43.6 mm

 

Input voltage

• AC Power
- Rated AC voltage: 100V to 240V AC; 50/60 Hz - Max. AC voltage: 90V to 290V AC; 45–65 Hz
• DC Power
- Rated DC voltage: –48V –60V
- Max. DC voltage -38.4V DC -72V DC

MAC

Up to 384K MAC address entries
IEEE 802.1d standards compliance
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses

VLAN

4K VLANs
Guest VLANs and voice VLANs
GVRP
MUX VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
VLAN mapping

ARP

Static ARP Dynamic ARP

IP routing

Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, routing policy
Up to 256K FIBv4 entries
Up to 80K FIBv6 entries

Interoperability VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST Link-type Negotiation Protocol (LNP), similar to DTP

VLAN Central Management Protocol (VCMP), similar to VTP

Wireless service

AP access control, AP domain management, and AP configuration template management
Radio management, unified static configuration, and dynamic centralized management

WLAN basic services, QoS, security, and user management CAPWAP, tag/terminal location, and spectrum analysis

Ethernet loop protection

RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing millisecond- level protection
switchover
SEP
ERPS (G.8032)
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
BPDU protection, root protection, and loop protection

MPLS

MPLS L3VPN
MPLS L2VPN (VPWS/VPLS) MPLS-TE
MPLS QoS

IPv6 features

Neighbor Discover (ND)
PMTU
IPv6 Ping, IPv6 Tracert, IPv6 Telnet
ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types
Multicast Listener Discovery snooping (MLDv1/v2)
IPv6 addresses configured for sub-interfaces, VRRP6, DHCPv6, and L3VPN

Multicast

IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk
Controllable multicast
Port-based multicast traffic statistics
IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM
MSDP
Multicast VPN

QoS/ACL

Rate limiting in the inbound and outbound directions of a port Packet redirection
Port-based traffic policing and two-rate three-color CAR Eight queues on each port

DRR, SP, and DRR+SP queue scheduling algorithms
WRED
Re-marking of the 802.1p and DSCP fields of packets
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address,

destination MAC address, source IP address, destination IP address, TCP/UDP source/destination
port number, protocol type, and VLAN ID
Queue-based rate limiting and shaping on ports

VXLAN VXLAN functions, VXLAN L2 and L3 gateways, BGP EVPN VXLAN configuration using NETCONF/YANG

SVF

Acting as the parent node to vertically virtualize downlink switches and APs as one device for
management
Two-layer client architecture

ASs can be independently configured. Services not supported by templates can be configured on
the parent node.
Third-party devices allowed between SVF parent and clients

iPCA

Marking service packets to obtain the packet loss ratio and number of lost packets in real time
Measurement of the number of lost packets and packet loss ratio on networks and devices

Management and maintenance

Cloud-based management Virtual cable test
SNMP v1/v2c/v3
RMON

Web-based NMS
System logs and alarms of different severities GVRP
MUX VLAN
NetStream
Telemetry

Copyright © 2024 CanServers | All Prices are in CAD. All used custom and refurbished servers are shipped from Canada.